Please wait while the page loads...

Is it safe to drive your 2013 Lexus CT 200h with the check engine light on?

If the check engine light is flashing, this means that there is a important issue and it is recommended to service your Lexus CT 200h shortly. This question is not exceedingly evident because it all depends on the severity of the issue. If the cause is a minor issue, such as a loose gas cap, it should be dependable to drive. This is consistently indicated by a persistent glow of the check engine light. If you notice a difference in the performance of the vehicle, it could be an indication of a more specific problem. Call the consultants at Plaza Lexus by dialing 3145823688 so you can describe the issues. Or reduce your speed and bring your 2013 Lexus to our certified mechanics as soon as possible.

What Does the Check Engine Light Mean?

One of the most commonly misunderstood lights or indicators in your 2013 Lexus CT 200h is the check engine light. The check engine light is part of the onboard diagnostics system, and displays in a few alternative ways. It can say "Check Engine", it can be a symbol of an engine, it can even be a combination of both. This light illuminates in either an amber or red color and is part of the diagnostics system found on your vehicle. Onboard computers increasingly have controlled and monitored vehicle performance since the 80s and do a variety of things for your 2013 Lexus CT 200h. Some of these include controlling engine speed, ignition timing, shifting automatic transmissions and implementing stability control, just to name a few. With that being said, the check engine light can represent a assortment of alternative things. It can be as authentic as your gas cap being loose or as precarious as engine knocking. If your check engine light is on in your 2013 Lexus CT 200h, contact Plaza Lexus. Our Lexus service department can help you find out what code is turning your check engine light on or diagnose why your check engine light is flashing. Contact Plaza Lexus today!

2013 Lexus CT 200h Check Engine Light

If the check engine light in your 2013 Lexus CT 200h starts flashing, that means that the problem needs fast attention and your Lexus should be brought in expeditiously. A flashing light illustrates that the problem is dangerous and if not taken care of expeditiously may result in major damage to the vehicle. This blinking light usually suggests a rigid engine misfire allowing unburned fuel to be dumped into the exhaust system. There it can hastily raise the temperature of the catalytic converter to a point where damage is achievable, requiring an expensive repair. Some owners ask if spark plugs cause the check engine light to flash? This can absolutely be the cause. A bad, common or dirty spark plug can cause the engine to misfire. If your check engine light is flashing, please contact our team of automotive consultants at Plaza Lexus expeditiously by calling 3145823688. If the problem is ignored or you continue to drive, this can spread to the spark plug wires, catalytic converter, or ignition coils which can lead to a very expensive repair.

2013 Lexus CT 200h Check Engine Light Flashing

Although there are many achievable causes of an illuminated Check Engine Light, we know from years of providing Check Engine Light Diagnosis Service that there are many modern causes consisting something as effortless as a loose gas cap. Extra modern reasons for a Check Engine Light are a malfunction with the fuel injection system, damaged oxygen sensor, faulty emissions control part, dirty mass airflow sensor, faulty head gasket, or defective spark plugs to name a few. No matter what is the root cause of the Check Engine Light, we have the Lexus Certified Technicians and the certified service protocol to isolate the root problem and repair it as decisive to restore factory specifications. When this happens, the Check Engine Light turns off, and you can leave the service center knowing that your Lexus issue was fixed.

Every 2013 Lexus CT 200h was designed with a high-technology performance monitoring system with a computer, and a series of sensors positioned strategically throughout the vehicle on its laborious systems. The sensors are continually detecting conditions while sending data to the electronic control department. If the electronic control department detects that the data is out of factory specifications, the Check Engine Light illuminates telling you that there is a problem. However, that is the limitation of the Check Engine Light – it won’t tell you what specifically is erroneous nor what to do about it. That’s where we come in; Plaza Lexus provides a Check Engine Light Diagnosis Service that isolates the core problem and gives you a recommendation on what to do next from a Tremendously Qualified Service trained.

Check Engine Light Service 2013 Lexus CT 200h

What do you do when you’re driving along in your Lexus CT 200h and suddenly, a yellow light illuminates on your dash and says "Check Engine". If you’re like most Lexus owners, your heart sinks a little because you have little idea about what that light is trying to tell you or how you should react. The fear of the unknown (or the cost of the unknown) can be just as stressful. But take a deep breath and realize the light coming on doesn’t imply you have to pull the car over to the side of the road and call a tow truck, but it is recommended that you get your 2013 Lexus CT 200h checked as soon as attainable. Ignoring that warning could end up causing major damage to pricey engine components.

When your 2013 Lexus CT 200h's ECM (electronic control module), which is the vehicle's onboard computer, finds a problem in the computerized control system that it can’t affable, a computer turns on your check engine light. This amber or yellow light is typically labeled “check engine” or “service engine soon”, or the light may be nothing more than a picture of an engine, or a picture of the engine with the word “check.”

When the light turns on, the ECM stores an engine code or “trouble code” in its memory that identifies as the issue, whether it's a sensor or a failing engine part. This code is read with an electronic analyze tool that is used by our Lexus auto repair mechanics at Plaza Lexus. There are also a number of relatively correct code readers that are designed for do-it-yourselfers, should you choose that route too. While this code will tell you the issue that is detected, a true diagnosis still requires an experienced professional to choose the issue and repair it.

Will the check engine light reset itself?

The check engine light on your 2013 Lexus CT 200h will ordinarily shut itself off if the issue or code that caused it to turn on is repaired. For example, if the cause of your check engine light coming on was a loose gas cap, if it's tightened, the light will turn itself off. Likewise, if your catalytic converter is going realistic, and you did a lot of stop-and-go driving, that may have turned on the check engine light due to the high usage of the converter. In most cases, your 2013 Lexus CT 200h light will go off after about 20-40 miles. If you travel to work over that reward and the light is still on, you will need to bring it in to Plaza Lexus so the light and code can be double-checked and reset.

What could cause the check engine light to come on in a 2013 Lexus CT 200h?

When your check engine light comes on, this could be as real as tightening or replacing your gas cap. Likewise, the check engine light could also be a warning of a hazardous problem that could cause hazardous damage to your engine and come with a considerable repair bill. Depending on your make and model, the check engine light will illuminate or blink. A plausible glow typically means something less hazardous but a flashing check engine light indicates that your vehicle’s engine is in hazardous trouble and service is basic today. If your check engine light is flashing in your 2013 Lexus CT 200h, we highly recommend not to drive the vehicle and schedule Lexus service now. Below is a list of the most real reasons your check engine light can come on:

  • Your 2013 Lexus CT 200h has a vacuum leak. Every Lexus CT 200h has a vacuum system that performs a gigantic variety of functions. The vacuum system also helps decrease harmful emissions by routing the fumes as gasoline evaporates through the engine. If you notice that your RPM is high in idle or randomly surges, a vacuum leak could be the cause. Over time, vacuum hoses can arid out and crack, exceptionally if they’re exposed to exciting heat or extreme concerned.
  • Your catalytic converter is bad or going bad. The catalytic converter is a part of your 2013 Lexus CT 200h’s exhaust system. The catalytic converter's function is to turn the carbon monoxide created by the combustion process into carbon dioxide. A damaged catalytic converter is typically caused by neglected maintenance, which is why Plaza Lexus offers a complimentary multi-point inspection with every Lexus service. If you have an issue with your catalytic converter and don't get it repaired, your 2013 Lexus CT 200h will not pass an emissions test, show a lack of engine performance and will negatively affect your fuel economy. Your car may run at a higher temperature, too, which can cause added problems from overheating.
  • Your mass airflow sensor (known as MAF) needs to be replaced. The mass airflow sensor in your Lexus CT 200h is what determines how much fuel is decisive to run your engine efficiently by measuring the fee of air entering the engine. As a part of the engine management system, the mass airflow sensor helps adjust to clear changes, like altitude. If your Lexus CT 200h is having trouble starting, idling rough or has a agile change in the position of the throttle pedal, this could be a sign of a bad mass airflow sensor.
  • The battery is poor or dead. The battery in your 2013 Lexus CT 200h is every alarming. Without a car battery, your car won’t start, light up the road ahead, play the radio or charge your phone. Today’s car batteries last much longer than they did a few decades ago, and they don't certainly require maintenance. The rate of a new one depends on the type of Lexus you commute, but check our ongoing service coupons and specials.
  • One of the most common and countless cause is that your 2013 Lexus CT 200h gas cap is loose, damaged or missing. The gas cap for your 2013 Lexus CT 200h serves multiple purposes. It prevents gas fumes from being released when you aren't driving, it seals the fuel system and helps maintain pressure within the fuel tank. What happens if you have a bad fuel cap? If your gas cap is classic or has a ruptured seal, you can lose fuel through evaporation which will result in more trips to the pump. Luckily, to replace a gas cap isn't expensive. If your check engine light turns on immediately after you put gas in your 2013 Lexus CT 200h, earliest thing you should check is to make sure the cap isn’t loose — or that it's still on your car’s roof or at the fuel pump.
  • New Spark Plugs or Plug Wires are decisive for your 2013 Lexus CT 200h. The spark plugs are the part of your engine that ignites the air/fuel mixture in the combustion chamber of your vehicle. This explosion is what moves the pistons and makes the engine run. The spark plug wires deliver the spark from the ignition coil to the spark plugs. If your spark plugs or spark plug wires are bad or classic, you will experience poor performance and reduced power. In some extreme cases, your engine will have trouble starting or continuing to run. Worn spark plugs and plug wires can cause clogged catalytic converter or damage to ignition coils and O2 sensors, finest to more expensive repairs.
  • Issues with any aftermarket items. An aftermarket alarm, exhaust or added item can wreak havoc on your 2013 Lexus CT 200h if it’s not installed accordingly. These aftermarket parts and accessories can drain the battery, trigger the check engine light, or even prevent the vehicle from starting. If these issues sound present, bring your CT 200h to Lexus and have our department of certified mechanics ensure that your aftermarket items were installed correctly and aren't causing any issue. Getting accessories, exceptionally aftermarket parts and accessories, or using OEM parts earliest place might cost a scant bit more but could save you money from having to get poor perform and damage caused by poor installation perform corrected.
  • Your O2 Sensor (Oxygen Sensor) needs to be replaced. The Oxygen sensor, effortless as the O2 sensor, measures the fee of oxygen in your exhaust system. If there is excess oxygen in your exhaust system, fuel burns faster and your vehicle will be less functional when it comes to fuel economy. So what happens if I don’t replace your O2 sensor? A faulty sensor can not only affect your miles per gallon, but it can cause damage to your catalytic converter and your 2013 Lexus CT 200h's spark plugs. The O2 sensor sends data to the vehicle’s onboard computer to endorse the right mixture of air and fuel that enters the cylinders in your engine. A bad O2 sensor can also cause a car to fail an emissions test.

How much does it cost to get the engine light checked?

The check engine light warns of issues ranging from a gas cap that's not properly tightened to a more detectable failure like a bad catalytic converter or a problem with one of the car's oxygen sensors, so it good to get the apt code reading and diagnosis. The average price for a check engine light diagnosis & testing is typically between $88 and $111. The good news, Plaza Lexus offers complimentary multi-point inspections and free diagnostics, in most cases, to help pick the cause of your check engine light.

2013 Lexus CT 200h Check Engine Light Codes

The check engine light turning on can be quite intimidating to see that little light on your vehicle’s dashboard instantly illuminates, but in reality, it is not something that should cause you to shut down in fear right away. If you hear the term, diagnostic trouble codes (DTC), these are just another name for check engine light codes. These are automotive computer codes stored by the ECM, also acknowledged as the OBD (on-board computer diagnostic system) in your CT 200h. There are hundreds of back-up codes that your check engine light can opt for. While that sounds daunting, with a little patience, tackling vital diagnostics will give you available knowledge about your vehicle and will also allow that Check Engine Light to do what it is really supposed to do: be your guide. Unfortunately, noticeable and available vehicle symptoms do not always accompany an illuminated Check Engine Light. Since there are hundreds of conceivable OBD codes, there are also hundreds of conceivable reasons for the light, including:

  • Old Battery
  • Bad Spark Plugs
  • Computer output circuit issues
  • Ignition system faults
  • Emissions controls issues
  • Fuel and air metering systems problems
  • O2 Sensor
  • Loose Gas Cap or Missing Gas Cap
  • Transmission issues

This is why it is unusual for someone who does not have various of automotive knowledge to not assume what a code means. When your check engine light comes on, you should get it checked out quickly by a certified Lexus mechanic. Call Plaza Lexus at 3145823688 at this moment or schedule your check engine light service online today! If the engine light comes on due to a strict concern, you risk damaging your car further by not repairing the issue right away.

How many miles can you drive with the check engine light?

If you check engine light is flashing, we recommend that you pull over and contact Plaza Lexus to help designate if your vehicle is reliable to drive in or if we recommend a tow truck. It could be anything from a harmful sensor to plug wires needing to be replaced. The safest bet is to decipher the code and then plan your strategy accordingly. Since each check engine code has its own level of severity, it is laborious to predict how many miles you can drive with the warning light on.