Please wait while the page loads...

2014 Lexus CT 200h Check Engine Light Flashing

Although there are plentiful potential causes of an illuminated Check Engine Light, we know from years of providing Check Engine Light Diagnosis Service that there are several definite causes including something as uncomplicated as a loose gas cap. Substitute definite reasons for a Check Engine Light are faulty head gasket, a malfunction with the fuel injection system, faulty emissions control part, damaged oxygen sensor, dirty mass airflow sensor, or defective spark plugs to name a few. No matter what is the root cause of the Check Engine Light, we have the Lexus Certified Technicians and the certified service protocol to isolate the root problem and repair it as mandatory to restore factory specifications. When this happens, the Check Engine Light turns off, and you can leave the service center knowing that your Lexus issue was fixed.

Every 2014 Lexus CT 200h was designed with a high-technology performance monitoring system with a computer, and a series of sensors positioned strategically throughout the car on its basic systems. The sensors are continuously detecting conditions while sending data to the electronic control company. If the electronic control company detects that the data is out of factory specifications, the Check Engine Light flashes telling you that there is a problem. However, that is the limitation of the Check Engine Light – it won’t tell you what specifically is wrong nor what to do about it. That’s where we come in; Plaza Lexus provides a Check Engine Light Diagnosis Service that isolates the core problem and gives you a recommendation on what to do next from a Immensely Qualified Service professional.

Is it safe to drive your 2014 Lexus CT 200h with the check engine light on?

This question is not very convinced because it all depends on the severity of the issue. If the cause is a minor issue, such as a loose gas cap, it should be safe to drive. This is commonly indicated by a consistent glow of the check engine light. If you notice a difference in the performance of the vehicle, it could be an indication of a more strict problem. If the check engine light is blinking, this means that there is a strict issue and it is recommended to service your Lexus CT 200h at this moment. Call the experts at Plaza Lexus by dialing 3145823688 so you can describe the issues. Or decrease your speed and bring your 2014 Lexus to our certified mechanics as soon as feasible.

What could cause the check engine light to come on in a 2014 Lexus CT 200h?

When your check engine light comes on, this could be as easy as tightening or replacing your gas cap. Likewise, the check engine light could also be a warning of a relentless problem that could cause relentless damage to your engine and come with a large repair bill. Depending on your make and model, the check engine light will illuminate or blink. A steady glow consistently means something less relentless but a flashing check engine light indicates that your vehicle’s engine is in relentless trouble and service is needed hastily. If your check engine light is flashing in your 2014 Lexus CT 200h, we especially endorse not to drive the vehicle and schedule Lexus service straightaway. Below is a list of the most easy reasons your check engine light can come on:

  • The battery is scanty or dead. The battery in your 2014 Lexus CT 200h is every momentous. Without a car battery, your car won’t start, light up the road ahead, play the radio or charge your phone. Today’s car batteries last much longer than they did a few decades ago, and they don't really require maintenance. The price of a new one depends on the type of Lexus you drive, but check our central service coupons and specials.
  • One of the most traditional and frequent cause is that your 2014 Lexus CT 200h gas cap is loose, damaged or missing. The gas cap for your 2014 Lexus CT 200h serves multiple purposes. It prevents gas fumes from being released when you aren't driving, it seals the fuel system and helps maintain pressure within the fuel tank. What happens if you have a bad fuel cap? If your gas cap is aged or has a ruptured seal, you can lose fuel through evaporation which will result in more trips to the pump. Luckily, to replace a gas cap isn't expensive. If your check engine light turns on instantly after you put gas in your 2014 Lexus CT 200h, first thing you should check is to make bold the cap isn’t loose — or that it's still on your car’s roof or at the fuel pump.
  • Issues with each aftermarket items. An aftermarket alarm, exhaust or extra item can wreak havoc on your 2014 Lexus CT 200h if it’s not installed properly. These aftermarket parts and accessories can drain the battery, trigger the check engine light, or even avoid the vehicle from starting. If these issues sound accepted, deliver your CT 200h to Lexus and have our unit of certified mechanics ensure that your aftermarket items were installed correctly and aren't causing each issue. Getting accessories, especially aftermarket parts and accessories, or using OEM parts first place might cost a tiny bit more but could save you money from having to get poor work and damage caused by poor installation work corrected.
  • New Spark Plugs or Plug Wires are decisive for your 2014 Lexus CT 200h. The spark plugs are the part of your engine that ignites the air/fuel mixture in the combustion chamber of your vehicle. This explosion is what moves the pistons and makes the engine run. The spark plug wires deliver the spark from the ignition coil to the spark plugs. If your spark plugs or spark plug wires are bad or aged, you will experience poor performance and reduced power. In some extreme cases, your engine will have trouble starting or continuing to run. Worn spark plugs and plug wires can cause clogged catalytic converter or damage to ignition coils and O2 sensors, big to more expensive repairs.
  • Your catalytic converter is bad or going bad. The catalytic converter is a part of your 2014 Lexus CT 200h’s exhaust system. The catalytic converter's function is to turn the carbon monoxide created by the combustion process into carbon dioxide. A damaged catalytic converter is usually caused by neglected maintenance, which is why Plaza Lexus offers a complimentary multi-point inspection with every Lexus service. If you have an issue with your catalytic converter and don't get it serviced, your 2014 Lexus CT 200h will not pass an emissions test, show a lack of engine performance and will negatively affect your fuel economy. Your car may run at a higher temperature, too, which can cause extra problems from overheating.
  • Your mass airflow sensor (known as MAF) needs to be replaced. The mass airflow sensor in your Lexus CT 200h is what determines how much fuel is decisive to run your engine efficiently by measuring the drain of air entering the engine. As a part of the engine management system, the mass airflow sensor helps adjust to certain changes, like altitude. If your Lexus CT 200h is having trouble starting, idling rough or has a abrupt change in the position of the throttle pedal, this could be a sign of a bad mass airflow sensor.
  • Your 2014 Lexus CT 200h has a vacuum leak. Every Lexus CT 200h has a vacuum system that performs a giant variety of functions. The vacuum system also helps lower harmful emissions by routing the fumes as gasoline evaporates through the engine. If you notice that your RPM is high in idle or randomly surges, a vacuum leak could be the cause. Over time, vacuum hoses can dry out and crack, especially if they’re exposed to important heat or extreme crisp.
  • Your O2 Sensor (Oxygen Sensor) needs to be replaced. The Oxygen sensor, familiar as the O2 sensor, measures the drain of oxygen in your exhaust system. If there is excess oxygen in your exhaust system, fuel burns faster and your vehicle will be fewer direct when it comes to fuel economy. So what happens if I don’t replace your O2 sensor? A faulty sensor can not only affect your miles per gallon, but it can cause damage to your catalytic converter and your 2014 Lexus CT 200h's spark plugs. The O2 sensor sends data to the vehicle’s onboard computer to mean the right mixture of air and fuel that enters the cylinders in your engine. A bad O2 sensor can also cause a car to fail an emissions test.

2014 Lexus CT 200h Check Engine Light Codes

The check engine light turning on can be quite intimidating to see that little light on your vehicle’s dashboard abruptly illuminates, but in reality, it is not something that should cause you to shut down in fear right away. If you hear the term, diagnostic trouble codes (DTC), these are just another name for check engine light codes. These are automotive computer codes stored by the ECM, also natural as the OBD (on-board computer diagnostic system) in your CT 200h. There are hundreds of further codes that your check engine light can represent. While that sounds daunting, with a little patience, tackling main diagnostics will give you convenient knowledge about your vehicle and will also allow that Check Engine Light to do what it is really supposed to do: be your guide. Unfortunately, accessible and decisive vehicle symptoms do not always accompany an illuminated Check Engine Light. Since there are hundreds of practical OBD codes, there are also hundreds of practical reasons for the light, including:

  • Emissions controls issues
  • Loose Gas Cap or Missing Gas Cap
  • O2 Sensor
  • Ignition system faults
  • Old Battery
  • Bad Spark Plugs
  • Transmission issues
  • Fuel and air metering systems problems
  • Computer output circuit issues

This is why it is dynamic for someone who does not have a lot of automotive knowledge to not assume what a code means. When your check engine light comes on, you should get it checked out promptly by a certified Lexus mechanic. Call Plaza Lexus at 3145823688 immediately or schedule your check engine light service online today! If the engine light comes on due to a perilous concern, you risk damaging your car added by not repairing the issue right away.

2014 Lexus CT 200h Check Engine Light

If the check engine light in your 2014 Lexus CT 200h starts flashing, that means that the problem needs immediate attention and your Lexus should be brought in rapidly. A flashing light implies that the problem is critical and if not taken care of rapidly may result in major break to the vehicle. This shining light frequently indicates a draconian engine misfire allowing unburned fuel to be dumped into the exhaust system. There it can immediately increase the temperature of the catalytic converter to a point where break is conceivable, requiring an expensive repair. Some owners ask if spark plugs cause the check engine light to flash? This can truly be the cause. A bad, historic or dirty spark plug can cause the engine to misfire. If the problem is ignored or you continue to drive, this can spread to the spark plug wires, catalytic converter, or ignition coils which can lead to a very expensive repair. If your check engine light is shining, please contact our team of automotive experts at Plaza Lexus hastily by calling 3145823688.

What Does the Check Engine Light Mean?

One of the most commonly misunderstood lights or indicators in your 2014 Lexus CT 200h is the check engine light. The check engine light is part of the onboard diagnostics system, and displays in a few supplemental ways. It can say "Check Engine", it can be a symbol of an engine, it can even be a combination of both. This light illuminates in either an amber or red color and is part of the diagnostics system found on your automobile. Onboard computers increasingly have controlled and monitored automobile performance since the 80s and do a class of things for your 2014 Lexus CT 200h. Some of these include ignition timing, shifting automatic transmissions controlling engine speed, and implementing stability control, just to name a lot. With that being said, the check engine light can imply a mixture of different things. It can be as easy as your gas cap being loose or as risky as engine knocking. If your check engine light is on in your 2014 Lexus CT 200h, contact Plaza Lexus. Our Lexus service department can help you find out what code is turning your check engine light on or investigate why your check engine light is flashing. Contact Plaza Lexus today!

How much does it cost to get the engine light checked?

The intermediate cost for a check engine light diagnosis & testing is typically between $88 and $111. The satisfactory news, Plaza Lexus offers complimentary multi-point inspections and free diagnostics, in most cases, to help designate the cause of your check engine light. The check engine light warns of issues ranging from a gas cap that's not correctly tightened to a more dangerous failure like a aggressive catalytic converter or a problem with one of the car's oxygen sensors, so it satisfactory to get the fair code reading and diagnosis.

How many miles can you drive with the check engine light?

The safest bet is to decipher the code and then plan your strategy accordingly. Since each check engine code has its own level of severity, it is difficult to predict how many miles you can drive with the warning light on. It could be anything from a damaging sensor to plug wires needing to be replaced. If you check engine light is flashing, we recommend that you pull over and contact Plaza Lexus to aid represent if your vehicle is strong to drive in or if we recommend a tow truck.

Will the check engine light reset itself?

The check engine light on your 2014 Lexus CT 200h will frequently shut itself off if the issue or code that caused it to turn on is fixed. For example, if the cause of your check engine light coming on was a loose gas cap, if it's tightened, the light will turn itself off. Likewise, if your catalytic converter is going feasible, and you did a few of stop-and-go driving, that may have turned on the check engine light due to the high usage of the converter. In most cases, your 2014 Lexus CT 200h light will go off after about 20-40 miles. If you drive over that amount and the light is still on, you will need to bring it in to Plaza Lexus so the light and code can be double-checked and reset.

Check Engine Light Service 2014 Lexus CT 200h

What do you do when you’re driving along in your Lexus CT 200h and swiftly, a yellow light lights up on your dash and says "Check Engine". If you’re like most Lexus owners, your heart sinks a tiny because you have tiny idea about what that light is trying to tell you or how you should react. The fear of the unknown (or the cost of the unknown) can be just as stressful. But take a deep breath and realize the light coming on doesn’t mean you have to pull the car over to the side of the road and call a tow truck, but it is recommended that you get your 2014 Lexus CT 200h checked as soon as usable. Ignoring that warning could end up causing considerable wear and tear to lavish engine components.

When your 2014 Lexus CT 200h's ECM (electronic control module), which is the vehicle's onboard computer, finds a problem in the electronic control system that it can’t honorable, a computer turns on your check engine light. This amber or yellow light is consistently labeled “check engine” or “service engine soon”, or the light may be nothing more than a picture of an engine, or a picture of the engine with the word “check.”

When the light turns on, the ECM stores an engine code or “trouble code” in its memory that identifies as the issue, whether it's a sensor or a failing engine part. This code is find out with an electronic investigate tool that is used by our Lexus auto repair mechanics at Plaza Lexus. There are also a number of relatively inexpensive code readers that are designed for do-it-yourselfers, should you designate that route too. While this code will tell you the issue that is detected, a true diagnosis still requires an experienced professional to designate the issue and repair it.